User Guide Controller MR9600

MR9600 User Guide
38 CommPlete Communications Server
getcalls
Parameter: Device or None
Description: Displays call traffic for the modems listed in device. If there is no parameter, call traffic is
listed for every installed modem.
Security: Supervisor
Example:
[0] A:\ #
[1] A:\ # getcalls
1A No Calls
1B No Calls
1C 05-21 08:15:02 A-33600-V.42bis 000-00:00:08
1C 05-21 08:15:41 A-33600-V.42bis 000-00:00:08
1C 05-21 08:32:58 A-33600-V.42bis 000-00:00:09
2A 05-21 08:13:48 O-33600-V.42bis 000-00:00:08 DT13
2A 05-21 08:14:26 O-33600-V.42bis 000-00:00:09 DT13
2A 05-21 08:15:02 O-33600-V.42bis 000-00:00:08 DT13
2A 05-21 08:16:20 O-33600-V.42bis 000-00:00:08 DT13
2A 05-21 08:33:02 Originate Open Call DT13
2B 05-21 08:13:47 O-33600-V.42bis 000-00:00:08 DT16
...
[2] A:\ #
getdevices
Parameter: Device
Description: Displays the current status of each device in the system
Security: Operator
Example:
[0] A:\MMM # getdevices
1A RAS Up
5A RAS Up
5B T1 Online
6A Modem Connected 11-06 16:22:16 A-21/24:V34:42b USER1
6B Modem Connected 11-06 16:26:52 A-19/26:V34:42b USER2
6C Modem Connected 11-06 15:48:18 A-19/28:V34:42b USER3
6D Modem Connected 11-06 15:52:53 A-28/52:V90:42b USER4
6E Modem Connected 11-06 16:01:31 A-21/40:V90:42b USER5
6F Modem Connected 11-06 16:04:28 A-28/28:V34:42b USER6
6G Modem Connected 11-06 16:10:24 A-24/28:V34:42b USER7
6H Modem Connected 11-06 16:25:56 A-28/24:V34:42b USER8
9A RAS Up
10A PRI Up Layer 1 Status: Up, Layer 2 Status: Multi-
Frame Estab
li
gete1
Parameter: Device
Description: Displays the current status of each e1 device. Security: Operator
Example:
[0] A:\MMM # gett1
5B T1 Online
13B T1 Online