CDMA Wireless Modem Reference Guide

Chapter 3 – Unsolicited AT Result Codes
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 26
Power Save +WSPS
Description: This response is output whenever a change occurs in the power save status. The +WSPS
command can also be used to exit power save mode.
Note: This response is not used in Verizon software versions.
Syntax: Response Syntax: +WSPS: <state>
Command Possible responses
+WSPS: 1
Note: Entering power save mode.
AT+WSPS
Note: Send command to leave power save mode.
OK
+WSPS: 0
Note: Command accepted.
AT+WSPS?
Note: Display current power mode state.
+WSPS: 0
OK
Note: Leaving power save mode.
<state>
0: Leaving power save
1: Entering power save