User's Manual

43
Chapter 5 - RouteFinder Manager
Edit Login Script for Remote Access
1. From the Port Settings, click Edit Login Script.
2. The login Script dialog box displays.
A sample remote access login script is shown below. If a remote access client is configured to
“bring up a terminal window after dialing”, this remote access login script initiates.
For Remote Access, the device will act as the server side...
Send ‘Welcome’ displays “Welcome” to remote site.
Send sends an Enter (Carriage return + line feed) to the remote site.
“Send Username” prompts the remote site for a user name.
“Retrieve 1” will wait for the remote site to enter the user name that will be used for PPP
authentication.
“Send Password” prompts the user for a password.
“Retrieve 2” will wait for the remote site to enter a password.
“Verify 3” instructs the device move to login script line 3 if PPP authentication fails.
“Go” means start PPP protocol.
Writing a login script for IP Routing
To write an effective login script, you must obtain the correct login script information from your ISP
and become familiar with using the login script commands.
Every ISP has a unique login interface screen. Check with your ISP to determine how your ISP
requests information from you when using a PPP connection.
Note: You can create a simple dial-up connection to view your ISP interface log-in screen using Dial-
Up Networking in Windows 95, 98, NT or 2000.
Some common commands are:
Send and SH FUNCTION
Send ‘ATZ’ Resets the Modem
Send ‘ATDT 888-1234’ Dials the phone number “888-1234”
Send ‘JaneDoe’ Types “JaneDoe” at the ISP interface
SH ‘1234’ Types “1234” at the ISP interface but displays **** on the RouteFinder
monitor to hide the password.
Send ‘’ Sends Enter (carriage return plus line feed) to the ISP
Wait FUNCTION
Wait 5 The Modem will wait for 5 seconds before moving to the next line in the