User's Manual

22
Chapter 3 - Software Installation and Configuration
Note: If you must dial a number to get an outside line (for example, “9”, or “0”), enter the required
number plus a “w”(wait) or a comma in the Telephone box (for example, 9w555-2323 or
9,,5552323). Each comma provides a 3-4 second delay.
User Name
Enter the User Name for your remote server or ISP account.
Password
Enter the Password for your remote server or ISP account.
Password Verification
Re-enter the password for your remote account.
Click Next.
10. The Setup Wizard: DNS IP Address dialog box displays.
Enter your ISP’s DNS Server IP address. If you are not sure of the IP address, contact your ISP.
Refer to the Glossary in the User Guide for more information about the DNS Server.
Click Next.
11. The Setup Wizard: Modem Settings dialog box displays.
The final step in configuring your RF802EW for basic operations is to define your modem
Manufacturer, Model and the DTE baudrate or speed of communication between the RF802EW’s
serial async port and your modem or ISDN TA.
Select your modem and baudrate as described on the following pages.
Note: If you do not have a device attached to the serial async port, use the default modem
values, and click Next.