User's Manual

21
Chapter 3 - Software Installation and Configuration
Use RADIUS Server
Select this option if you would like your remote clients to be authenticated on a RADIUS server.
You must enter the following RADIUS Server Settings:
RADIUS Access Server IP Address
Enter the IP address of the RADIUS Access Server.
RADIUS Accounting Server IP Address
Enter the IP address of the RADIUS Accounting Server.
Secret
Enter your Shared Secret.
Secret Verification
To confirm your Shared Secret, re-enter your Shared Secret.
Note: In most cases, the RADIUS Access Server and the RADIUS Accounting Server are the
same server, so the IP addresses will also be the same.
Click Next and continue with Step 10.
IP Routing (NAT Enabled) and IP Routing (NAT Disabled)
If you select IP Routing for the asynchronous port, the Setup Wizard: IP Routing dialog box
displays.
Enter the information required to dial-up and login to your ISP’s remote server:
Telephone Number
Enter the phone number used to dial your remote server (ISP).