User's Manual

20
Chapter 3 - Software Installation and Configuration
Use Local Client List
Use Local Client List allows you to create an authentication database consisting of user names,
passwords and dial-in options for each remote user. You must provide the following information for
each client:
User Name
Enter the User Name to authenticate the remote dial-in user.
Password
Enter the Password to authenticate the remote dial-in user. Passwords are limited to 16 characters.
Password Verification
Re-enter the remote dial-in user’s password.
Callback Type
Select one of the following three callback options for each remote client:
• No Callback: Select this option to allow the remote user to immediately connect to the network after
being authenticated. This is the default setting.
• Fixed Callback: This option allows you to specify a fixed callback telephone number for the user.
After the PPP negotiation, the device will disconnect, then callback the telephone number you
entered. This option is best used for clients requiring callback security while dialing-in from the same
location each time.
• Variable Callback: Select Variable Callback for remote users that travel or dial-in from various
locations and need callback security. This option allows clients to specify the callback telephone
number each time they connect to the network.
Click Add after entering information for each Local Client.
Click Next and continue with Step 10 when all users have been added to the database.