- Power Measurement Modem User's Guide

Standard Meter Security ION 7500 / ION 7600 User’s Guide
Page 148 Chapter 5 - Features and Applications
Changing the Meter Password
1. Scroll down the Setup menu and select the Security Setup menu.
2. Press the P
ROG button to enter the Security Setup menu.
3. Press the M
ODIFY softkey. The menu selection Password becomes highlighted as
well as the last zero.
4. Enter your new numeric password.
 To change the value of the highlighted digit use the Up/Down arrow
buttons.
 To change the position of the cursor one space to the left or right, use the
Left/Right arrow buttons.
5. Press P
ROG to accept the new password.
6. Press P
ROG to confirm your selection.
Disabling (and enabling) password security
Though it is not recommended, you can disable the meter password.
1. Scroll down the Setup menu and select the Security Setup menu.
2. Press the P
ROG button to enter the Security Setup menu.
3. Enter the current password and press
PROG if you are presented with the Enter
Password screen.
4. Press the softkey titled E
NABLE, and select Yes to enable password security (if it
has been disabled) or No to disable it.
5. Press
PROG to make your selection. The Confirm screen appears.
6. Press
PROG to confirm the change.