User manual

MultiModemISI Hybrid Series, ISIHI-2S 183
Index
command string, 64
Communications Mode command, 79
ConfigMenu
starting, 102, 163
Configuration, 102, 163
configuration
view current, 78
CTS (Clear to Send) signal, 99
D
Data
mode, 107
Data Buffer Control command, 80
Data call commands, 101
data calling tone, 85
Data Calling Tone command, 74
Data Compression command, 77
Data mode, returning to, 102, 160
Data Set Ready Control command, 76
Data Terminal Ready Control command, 76
Determinign Current System Settings, 18
diagnostic commands, 82
Dial a Stored Number command, 70
Dial command, 67, 107
dial tone, 67
wait time, 72, 73, 84
dialing
a phone number, 67
a stored number, 70
blind dialing, 67, 72
modifiers, 67
pause time, 68, 85, 87
smart dialing, 67, 72
Dialing a Stored Telephone Number, 108
Dialing a Stored Telephone Number (DS), 100
Dialing Method
AT command, 92
Dialing Pause command, 68
Disable Data Calling Tone Transmission command, 69
Disabling a channel, 93
Display Network Configuration commandI, 94
Display Product Information command, 102, 160
Displaying a stored number, 108
DMS-100 switch type, 92, 93
DSR (Data Set Ready) signal, 99
DSR signal
control of, 76
DTMF (dual tone multifrequency)
dialing, 68
frequencies, 149
DTR (Data Terminal Ready) signal, 100, 161
DTR dialing, 100, 161
DTR signal
control of, 76
E
Echo Command Mode Characters command, 72
Echo commands, 95, 160
Echo Online Data Characters command, 74
Embedded Protocol Analyzer, 94
En bloc sending, 92
enable / disable V.32bis and V.22bis auto rate, 86
enable / disable V.32bis start up auto mode, 86
enable / disable V.34 modulation, 85
Enable Synchronous Buffered Mode command, 81
Error correction, 97
error correction
automatic, 77
disabling, 77
selecting, 77
Error Correction Modes command, 77
Error Messages, 52
Escape character, 92
escape code character, 83
Escape Sequence Options command, 100, 161
Escape sequences, 102, 107, 160
+++ AT<CR>, 100, 161
<BREAK>AT<CR>, 100, 161
options, 100, 161
escape sequences, 81
+++AT<CR>, 81
Extended codes, 73
extended result codes, 158
F
fax warning, 167
FCC regulations, 166
Flash On-Hook command, 69
flow control, 79
commands, 79
disabling, 79
selecting local, 79
XON/XOFF pass through, 80
G
Go Back Online command, 81
Guard Tones command, 75
H
handshake, 74
handshake modulation, 75
Hang Up command, 108
hanging up, 67, 81
Hardware flow control, 97
Help File, 58