Technical information

hp officejet 5500 series
chapter 14
116
troubleshooting
hardware installation troubleshooting
Use this section to solve any problems you might encounter while installing the
HP Officejet hardware.
problem possible cause and solution
I received a message
on the front panel
display to attach the
front panel cover
This might mean the front panel cover is not attached, or it is attached
incorrectly. Make sure that you attach the bezel as described below
and that it is firmly in place.
1 Align the larger front panel cover over the buttons on the top of
the HP Officejet and snap it into place.
2 Align the smaller front panel cover over the buttons on the front of
the HP Officejet and snap it into place.
3 Make sure all the buttons can move freely.
larger cover
smaller cover