Specifications

Programmable Features Continued
• Call Override- With Call Override "on"-when The Stick "answers" a call
and you pick up an extension more than one second later, The Stick will
recognize the lifting of the handset and stop transmitting ring back tone to
the caller. You can immediately begin to talk or (within 15 seconds)
transfer the call to another device.
In some areas of the country, your local telephone company's lines and
switching equipment may cause this feature to not function properly. Just
deactivate the feature. (See the "Call Grab" feature explanation in the
Standard Features section for another option to Call Override.)
Factory preset is "off."
• Maximum Rings-This feature allows you to program the number of rings
transmitted to your phones/answering machine, fax and modem by The
Stick. Maximum Rings can be programmed anywhere from 4 rings
(minimum) to up to 30 rings.
Factory preset is 8 rings to all equipment.
• Unrestricted Manual Transfer- With the UMT feature "off," The Stick will
only allow a manual transfer to be done during the first 15 seconds of an
inbound call when answered from an extension.
The UMT feature, when activated, enables a transfer to be executed from
an extension phone and by either party at any time during the call, no
matter if the call is inbound or outbound.
Of course, inbound calls answered by equipment through the VOICE 1 or
2 ports may be transferred at any time using the appropriate SAC,
regardless of the setting for this feature.
Factory preset is "on."