Specifications

Programmable Features Continued
• Answering Machine Silent Transfer-This feature works like Unanswered
Call Silent Transfer except that it is designed for calls of 45 seconds or
less.
It should only be activated when you are using an answering machine to
field after-hours calls. When a manual fax or modem call arrives and the
answering machine has answered, the caller will still be able to get to a
destination device by staying on the line after the answering machine
"times out".
If you answer a call and hang up before 45 seconds, The Stick will transfer
the call to the designated device.
Factory preset is "off."
• Silent Transfer Destination- After activating either Silent Transfer
feature, you will want to tell The Stick where to route the call.
The "Destination" program feature gives you the option of routing all after-
hours calls to either the fax or modem.
Factory preset is to the port labeled "FAX".
• Programmable Security Access Codes (SAC's)-Transfer of a call is
executed by dialing the programmed SAC for each voice/data device
connected to The Stick.
SAC's are programmable (using a touch tone phone only) up to 4
characters long -digits 0 through 9 and symbols * (star) and # (pound).
The Stick will not detect SAC's dialed from "calling" pulse phones - only
from touch-tone phones.
Call transfers dialed by a pulse phone are limited to phones hooked to or
on the same line as The Stick and are limited to transfer to the "FAX" port
only.
The pulse dial SAC for this is fixed at "2" You must also have the "Pulse
Detect" feature on if you use a pulse dial phone to transfer a call.