Specifications

NOT-SO-SIMPLE IN LINE INSTALLATION
Pros:
• Total Barge-In Protection!
Cons:
• You may require the services of a telephone installation guru. Requires
severing the phone line before all existing wall jacks and installing either
modular jacks or RJ-11 modular plugs and an extra modular line cord.
This one can be real difficult due to the materials required and the point of
installation for The Stick. Remember, what we are trying to achieve in this
scenario is “Barge-In Protection." All voice calls are routed to all phones and fax
and modem calls go to their respective devices-without one being able to access
the other.
1. Find a point on the incoming phone line before all wall jacks or telephone
equipment. Sever the phone line.
2. Install two modular wall jacks on each end of the severed phone line.
Make sure you are using the correct pair of wires when connecting the
severed phone line to the modular jacks.
3. Plug one end of the supplied line cord into the port labeled “LINE” on The
Stick and the other end into the first modular wall jack. An additional line
cord will be needed to connect the port labeled “VOICE 1” to the second
modular wall jack.
4. From this location, additional wiring may need to be run to your fax
machine and computer modem (if located in another room).
Feature Recommendations Pertinent To Installation
• Set Rings To Answer to "0"
• *If you are using Pulse dial phones at any point, set Pulse Detection to
ON.