Specifications

SIMPLE PLUG-IN WITH EXTENSIONS
AND TOTAL BARGE-IN PROTECTION
Pros:
• Provides Total Barge-In Protection.
• Only voice calls will ring phone extensions.
• The best installation for total control of inbound calls.
Cons:
• Calls cannot be accessed from an extension phone before The Stick
answers.
• Installation requires splitter/adapters (not included) and an extra line cord.
• May need to do a little rewiring at each wall jack. (but probably not)
Most homes and businesses are wired with either 2-pair or 3-pair telephone
cable from extension to extension. This installation splitter/adapters utilizes the
unused pair of wires in the cable to connect all phones to the VOICE 1 port.
1. The point of connection to the telephone line for The Stick can be at any
extension wall jack. Unplug anything connected to this wall jack and plug a
splitter/adapter into the wall jack.
2. Plug one end of the supplied line cord into the port labeled “LINE” on The
Stick and the other end in the “Line 1” port of the splitter/adapter.
3. Connect the “VOICE 1” port of The Stick to the “Line 2” side of the
splitter/adapter using an additional line cord (not supplied).
4. At extension wall jacks located away from The Stick, unplug any phones
from these jacks. Plug splitter/adapters in all wall jacks. Reconnect
phones to the “Line 2” side of the splitter/adapters.
At any point “down line” from The Stick where it is impractical to insert a
splitter/adapter (for example: a wall mount telephone), this type of jack may be
converted by:
a. Swapping the GREEN wire with the BLACK wire
b. Swapping the RED wire with the YELLOW wire
The phone can then be plugged into the converted jack.