Programming instructions

Question: Can I connect more than 1 modem to the STICK?
Answer: Generally, any analog telephony equipment can be attached to any
device port as desired to meet individual needs.
Question: I am only sharing this line for Fax and Modem type equipment with no
inbound voice calls. What is the best
installation configuration?
Answer: Recommend connecting the FAX to Voice 1 and change option register
01 to value of 0. This will let a
ll FAX calls, with and
without CNG tone, find the FAX machine. The Fax port ran be used for any other
equipment, including a phone for outbound calls.
Question: Can I program the STICK from a remote location?
Answer: Yes, but you must have someone
at the STICK location initiate a call to
you from a phone attached to the STICK. After you
answer, with the caller on the line, programming codes can be entered from
either location.
Question: The light (LED) on the STICK blinks. What does it mean?
Answer: The blink pattern indicates which device port is active (off
-
hook or ring).
A single blink for voice port, double blink for fax
port, and triple blink for modem port.
ACP(Polnet) Questions and Answers
(“Polnet” and “ACP” are interchangeab
le terms referring to the same unit)
Question: Where is Device 1 port?
Answer: The connection/jack location of Device 1 is dependent upon whether
the RJ
-
31X or the T4x8 connector arrangement was
used in the installation. See the ACP Installation manual for details related to
the options.
Question: Is the ACP(3,5,9) Series compatible with Caller ID?