Programming instructions

Question: My FAX or Modem answers when I receive an inbound voice call.
Why?
Answer: Whe
n the SR is powered off, all device ports will see all incoming rings
from the phone company. Ensure power is supplied
to the SR. The power indicator should be lit.
LINEHUNTER Questions and Answers
Question: Will telephone company Voice Mail an
d Call Forwarding work with the
Line Hunter?
Answer: Yes. Each line of the Line Hunter and its associated device ports
operate basically like one of our SR units and routes the
incoming call by counting ring pattern and does not “answer” the telco’s r
ing.
This allows for un
-
answered calls to be acted upon by
telephone company services, like Voice Mail and Call forwarding. These
services may be active on any or all active lines.
Question: Will Caller ID work on the Line Hunter?
Answer: Yes, but only on the Line (Telco) side of the unit. Since the Line Hunter
counts ring bursts to determine device destination
for the incoming call, it must capture the first ring interval to accomplish this.