Specifications

The Stick II

PLEASE READ THE EXAMPLES BELOW.

 Make an outbound call from Line 1.

 Press  # # 9 9  to enter programming.

 You will hear the PROCEED tone (Bee-Bee-Bip).

 Press 

0 4  (This tells The Stick II you want to hear the programming for Register

04).

 You will hear BEEP BEEP. These tones represent the value 0. Register 04 is for

Unanswered Call Silent Transfer Line 2. The 0 value means this feature is turned

off.

 short pausenext youll hear the OK tone (Bee-Bip) and the PROCEED tone

(Bee-Bee-Bip).

 Now you can read back another register or exit the programming mode by dialing 80

to save and exit. You will hear the OK tone TWICE (Bee-Bip, Bee-Bip). The LED

will go back to normal operation.

.Registers Containing More Than a Single Value

Some registers contain more than a single value, i.e., Security Access Codes which

can be from one up to four characters of a telephone dialing pad. Below is a short

example of what a Read Back would sound like when more than 2 digits or symbols

are programmed in the Register. Lets say you have changed your Security Access

Code for Port 4 (Register Number 12) to 1823.

 Make an outbound call from Line 1.

 Press  # # 9 9 to enter programming.

 Press 

1 2 to listen to Register 12s programming.

 You will hear BIP (pause) BEEP BIP BIP BIP (pause) BIP BIP (pause) BIP BIP

BIP. (Equivalent to 1823).

 You will hear OK and PROCEED tones. (Bee-Bip) (Bee-Bee-Beep). The LED will

go back to normal operation after you dial "90" or "80".

Note: If you enter an incorrect Register number you will hear an ERROR tone.