Specifications

3.5 Checking your Programming
The Stick II allows you to review your programming changes or check and see if a
feature is (de) activated before leaving your home or office. This is done by signaling
back to you over the handset with audible tones.
There are two types of tones that The Stick II will transmit through your receiver on
the audible Read Back.
 A clipped, high pitched bip which has a numerical value of ONE.
 A long, low pitched beep which has the numerical value of FIVE.
The chart below describes the audible tones which coincide with each number or
symbol in a register.
NUMBER/SYMBOL AUDIBLE TONES
1 BIP
2 BIP BIP
3 BIP BIP BIP
4 BIP BIP BIP BIP
5 BEEP
6 BEEP BIP
7 BEEP BIP BIP
8 BEEP BIP BIP BIP
9 BEEP BIP BIP BIP BIP
0 BEEP BEEP
*
BEEP BEEP BIP
# BEEP BEEP BIP BIP
Executing Audible Read Back
 Enter programming mode  # # 9 9 .
 Press 
*
 and the Register Number you wish to read back.
The Stick II