Specifications

Auto-Line Select PORT 4
This feature, when ON, gives the port permission to access the non-default phone line
when making an outbound call if the ports default outbound line is in use. The 1
st
digit sets the
default outbound line for that port. The 2
nd
digit turns the Auto-Select feature ON or OFF.
Remember, you can not program all ports to Line 2 and Auto-Select OFF.
Auto-Line Select PORT 5
This feature, when ON, gives the port permission to access the non-default phone line
when making an outbound call if the ports default outbound line is in use. The 1
st
digit sets the
default outbound line for that port. The 2
nd
digit turns the Auto-Select feature ON or OFF.
Remember, you can not program all ports to Line 2 and Auto-Select OFF.
Alternate Port LINE 1
Voice calls for Line 1 always default to Port 1, but if it is in use for some reason (internal
conference or some one is using phone hooked to Port 1) this feature lets you redirect the call.
If the alternate port is busy, the caller gets a busy signal.
Auto-Line Select PORT 3
This feature, when ON, gives the port permission to access the non-default phone line
when making an outbound call if the ports default outbound line is in use. The 1
st
digit sets the
default outbound line for that port. The 2
nd
digit turns the Auto-Select feature ON or OFF.
Remember, you can not program all ports to Line 2 and Auto-Select OFF.
22
23
21
21
21
Ports 1-5
Alternate Port LINE 2
Voice calls for Line 2 always default to Port 2, but if it is in use for some reason (internal
conference or some one is using phone hooked to Port 2) this feature lets you redirect the call.
If the alternate port is busy, the caller gets a busy signal.
26
1
Ports 1-5
2
25
24
Programmable Features
& Programming Recommendations
Your
Program
Register
Number
Program
Range
Factory
Preset
1
st
digit
1 = Line 1
2 = Line 2
2
nd
digit
0 = OFF
1 = ON
1
st
digit
1 = Line 1
2 = Line 2
2
nd
digit
0 = OFF
1 = ON
1
st
digit
1 = Line 1
2 = Line 2
2
nd
digit
0 = OFF
1 = ON