Specifications

Maximum Rings LINE 2
This feature controls the no. of times a device (voice, fax modem) is rung by The Stick II
before dropping or transferring the call.
Port-to-Port Priority with Call Waiting Beeps
This feature controls whether a local internal call between ports takes precedence over an
incoming call. You can set the programming to beep over your internal call just like call waiting.
Simply disconnect from your internal call and The Stick II will process the call. The default is set
for ON with NO BEEPS, because internal modem or faxing could be disrupted.
18
1 to 30 rings
Auto-Line Select PORT 1
This feature, when ON, gives the port permission to access the other phone line when
making an outbound call if the ports default outbound line is in use. The 1
st
digit sets the default
outbound line for that port. The 2
nd
digit turns the Auto-Select feature ON or OFF.
Remember, you can not program all ports to Line 2 and Auto-Select OFF.
20
1
st
digit
1 = Line 1
2 = Line 2
2
nd
digit
0 = OFF
1 = ON
11
8
Auto-Line Select PORT 2
This feature, when ON, gives the port permission to access the non-default phone line
when making an outbound call if the ports default outbound line is in use. The 1
st
digit sets the
default outbound line for that port. The 2
nd
digit turns the Auto-Select feature ON or OFF.
Remember, you can not program all ports to Line 2 and Auto-Select OFF.
21
21
19
1
Maximum Rings LINE 1
This feature controls the no. of times a device (voice, fax modem) is rung by The Stick II
before dropping or transferring the call.
17
1 to 30 rings
8
0 = OFF
1 = ON with
NO beeps
2 = ON and
beeps
1
st
digit
1 = Line 1
2 = Line 2
2
nd
digit
0 = OFF
1 = ON