Specifications

LINE 2 FAX Port
This feature is designed so you can have two fax machines hooked to The Stick II. The
first
digit is your default port where all faxes for Line 2 will go. The
second digit routes faxes to an
alternate fax port if your fax default port is busy. Enter 0 for both digits to turn this feature OFF.
The default is set up as if you only have one fax machine connected to Port 4.
Register
Number
Program
Range
Factory
Preset
Your
Program
Programmable Features
& Programming Recommendations
LINE 1 FAX Port
This feature is designed so you can have two fax machines hooked to The Stick II. The
first digit is your default port where all faxes for Line 1 will go. The
second digit routes faxes to an
alternate fax port if your fax default port is busy. Enter 0 for both digits to turn this feature OFF.
The default is set up as if you only have one fax machine connected to Port 4.
01 1
st
digit
Ports 0-5
2
nd
digit
Ports 0-5
44
03 0 = OFF
1 = ON
0
Unanswered Call Silent Transfer LINE 1
UCST (when programmed ON) routes all unanswered calls (on any installation) in conjunction
with the Max Rings feature. Use Silent Transfer Destination programming to designate which
Port you want to receive the transferred call.
02 44
1
st
digit
Ports 0-5
2
nd
digit
Ports 0-5
04 0
0 = OFF
1 = ON
Unanswered Call Silent Transfer LINE 2
UCST (when programmed ON) routes all unanswered calls (on any installation) in conjunction
with the Max Rings feature. Use Silent Transfer Destination programming to designate which
Port you want to receive the transferred call.
05
1 = Port 1
2 = Port 2
3 = Port 3
4 = Port 4
5 = Port 5
4
Silent Transfer Destination LINE 1
This feature determines which Port/device will receive a call after it has been silently
transferred.