Operating instructions

Safety
Instructions
Read These Instructions !!!
When using your SR Series Call Processor,
basic safety precautions should always be
followed to reduce the risk of
fire, electric shock and injury to persons,
including the following:
1. Read and understand
all instructions.
2. Follow
all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet
before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for wiping off the
plastic cabinet.
4. Do not use or install this product near water, for example, near a bath
tub, wash bowl, kitchen sink, or laundry tub,
in a wet basement, or near a
swimming pool.
5. Do not place this product
on an unstable cart, stand, or table. The
product may
fall, causing serious damage to the product.
6. This product should never be placed near or
over a radiator or heat
register.
7. This product should be operated only from the type of power source
indicated
on the marking label. If you are not sure of the type of power
supply to your home, consult your dealer or local power company.
8. This product
is equipped with a three wire grounding type plug having a
third (grounding)
pin. This plug will only fit into a grounding type power
outlet. This
is a safety feature. If you are unable to insert the plug into the
outlet, contact your electrician to
replace your obsolete outlet. Do not
defeat the safety purpose of the grounding type plug.
9. Do not allow anything to rest
on the power cord. Do not locate this
product where the cord will be abused by persons walking
on it.
10. Do not overload
wall outlets and extension cords as this can result in
the risk of fire or electric shock.
6
SR Serles