Operating instructions
Table Of Contents
Features and
Applications
There are
many
applications for your SR
Call
Processor
in
the home or
small
business. To
optimize the phone configuration that
is
best
for you, it
is
important to understand the
features
available from your SR
Call
Processor.
FEATURES
Exclusion
Feature
-
Both SR models
have
an
exclusion feature which
allows you to control line accessibility between your phone devices. This
feature can be activated by the protection switch labeled
“Barge-In”
on
the
front
panels
of the SR2 and SR3.
(See
inside front cover for end-panel
view).
1)
“Barge-In”
Protection
On
-
This setting enables you to protect
phone conversations and data transmissions from being interrupted by
other phone devices
on
the
same
line. When extensions are picked up
a busy
signal
will be heard.
2)
“Barge-In”
Protection Off
-
This setting allows you to answer any
incoming
call
from any extension
in
the home or business. In addition,
you can conference any
call
from any extension.
Surge Protection
-
This feature
is
standard for both the SR2 and SR3.
Harmful voltage spikes will be carried to the earth ground through the
SR’s
internal
surge suppression network when the SR
is
properly installed.
2/3
Port
Select
Switch [SR3 only]
-
This switch allows you to configure
your SR3 to
operate
with either 2 or 3 numbers. In the “2” position,
calls
will ring through to
Device
2
in
the shortest possible time. If you
have
3
numbers, the switch must be set
in
the
“3”
postion.
4
SR Series