Operating instructions

How The SR Cal1 Processor
Works
The SR Call Processor counts the number of bursts in the ring pattern of
the telephone number
called. It then directs the call to one of the
numbered device ports at the rear of the unit. The device ports are output
jacks that connect your phone devices (phones, MODEMs, FAX, answering
and dictation machines) to the SR
Call Processor. When you have
attached the phone devices you wish to use, the SR Call Processor routes
each different ring pattern (i.e. telephone number) to a specific phone
device without ringing other phones on the same line.
Example:
Ring Pattem
Port
Original Number Device 1
Second Number Device 2
Third Number
Device 3
Devices Used (examples)
Telephones
FAX
Computer Modem (SR3 only)
SR Series 3