Operating instructions

Why does my SR Call Processor repeatedly click-click
when I pick up the line?
If you cannot get a dial tone, and only hear a click-
click every two seconds or so, the SR
does not have a good connection to
the phone company. Check your installation and wiring for
loose or open
connections. Connect a single-line telephone directly to the incoming line.
Check for dial tone and proper operation. A dead line should be reported to
your telephone company.
Why does my FAX answer all incoming calls?
Your SR Call Processor may not be getting any power. Check the LED
indicator
on the front panel. If the LED is not lit, check the power
connector, the AC adaptor, and the
AC power source.
SR Series
21