Operating instructions
Table Of Contents
4)
If
necessary,
install
an
RJ-11
on
the
KSU
side
of this
line.
Connect the
“DEVICE 1”
jack
to this RJ-11 with a
line
cord.
5) If necessary, run additional station wiring to the data devices and
install
modular
jacks
on
each
end. Connect the proper DEVICE
jack
on
the SR to
the
close
jack,
and connect the data
device
to the far
jack.
B. RJ-14
Two
Line System
(no
KSU)
Ring
Supervision:
Excellent
Barge-in
Protection:
Excellent
Install,
Ease/Expense
Call
an
Installer!
This installation scheme has
been
the Waterloo of
many
an
armchair
telephone man. Either you or your wiring will emerge the victor, and the
odds are greatly against
you!
Think of your family.
Save
yourself the high
cost of going insane and get someone who knows what they are doing to
install
this one for
you.
We
have
provided you with a picture, so you may
see
how difficult the
wiring configuration and installation
is.
Don't
stress out if you don’t
understand it
-
simply show the diagram to your local telephone installer.
SR Serles
19