Operating instructions

C. Installation with Adapters:
(only for use in homes where only one line is
used, and each jack has four wires attached)
Ring Supervision:
Excellent
Barge-in Protection:
Excellent
Install, Ease/Expense Good
Materials
Needed: 1 two-line splitter for each existing wall jack, 1 line cord.
To Telephone
Co. Central
Office
l=
If your home has 4 or 6-wire cable to each wall jack, you can make your
installation look electronically like installation B by using
special 2-line (to
1-line) splitter
adapters*. The adapters will utilize an unused pair of wires
in your home to connect your telephones.
1) Choose a location where there
is an existing wall jack and where only
one phone or data device will be connected BY ITSELF to a DEVICE
jack.
You will install your SR at this location.
2) Unplug anything connected to this wall jack and plug the 2-line
adapter*
into the wall jack.
3) (READ CAREFULLY) Connect the “LINE” jack of your SR to the
“LINE 1” side of the 2-line adapter with the supplied line
cord.
* Refer to Recommended Parts and Materials Section, page 22 Sectiuo2.
14
SR Series