Operating instructions

You will need to apply power to your SR with the
supplied AC adaptor. Be
sure to pick an installation V
location where a grounded 110VAC power outlet is nearby. You will also
want to set the switch(es) on your SR for your particular application (See
inside front cover).
Initial Check Out
Please
check the box and make sure you have:
-either an SR2 or SR3 Selective Ring Call Processor
-a 12 VAC
Class 2 power source
-one silver modular line cord with
RJ- 11 plugs on each end.
-a Warranty Registration Card
If any of these items are missing, please
alert the retailer from which you
purchased your SR
Call Processor and also Multi-Link, Inc. at
1-606-885-6363.
The following installation examples describe the best ways to attach your
SR to either a single or multiple line telephone.
Each is described with a
rating of how the installation handles ring supervision, barge-in protection,
and ease/expense of installation!
NOTE:
All installations described on the following pages assume that your
existing telephones will be rung by your primary number that generates a
single ring, and that your data equipment or
special phones will be rung by
the additional numbers that
generate multiple rings. If necessary, after
following these instructions, you may need to rearrange the number
assignments by rearranging the DEVICE
port connections on your SR.
10
SR Series