Installation manual

2
Release History
Released 08/06
Rev. 1 (01/07) Updated art to show correct 8 wire remote controller harness, multiple door switch harness with diodes
and CargoWatch sensor.
Rev. 2 (04/09) Updated the battery information page 20 and added new fuel tank bracket installation instructions pages
34-39.
Rev. 3 (01/10) Pages 62-63; Added new heavy duty battery hold down bracket.
Rev. 4 (04/11) Pages 12-13; added min/max dimensions for unit mounting bolts, page 14; updated unit dimension,
pages 20-23 and 56; added “Contact your Thermo King Dealer for specific part number”, page 20; added
Standard Display, Fuel Combo and Triple Combo Status Light Dimensions, page 21; add flush mounted Status
Light dimensions, pages 34-37; added 50 gallon Ultrasonic Fuel Level Sensor (USFLS) tank information, page
40; changed sensor harness wire code from 8F to 2PL and added “Thermo King recommends a conduit or
chase with 1.00 in (25.4 mm) I.D. to accommodate the electrical harness”., page 42-43; added details on how to
install and connect Status Lights, page 54-55; changed maximum gap from 19mm (0.75”) to 12.7mm (0.50”),
pages 58-59; removed reference to European Applications.
Rev. 5 (11/11) Page 7 - Revised Safety Precautions to include new Battery Installation and Cable Routing warnings and
cautions.
Rev. 6 (01/12) Page 34 -Added information about installing the optional Ultrasonic Fuel Level Sensor (UFLS) into the
fuel tank.
Rev. 7 (06/12) Page 56 - Added note about installing CargoLink wireless door switches.