Instruction manual

MULTILINK MC-E10 & MC-E100 CONVERTER SWITCH
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 5
3. Introduction
This section describes Multilink MC-E10 & Multilink MC-E100 models, including appearance,
features and typical applications.
3.1 Inspecting the Package and the Product
Examine the shipping container for obvious damage prior to installing this product; notify
the carrier immediately of any damage which you believe occurred during shipment or
delivery. Inspect the contents of this package for any signs of damage and ensure that the
items listed below are included.
This package should contain:
• 1 Multilink MC-E10 or Multilink MC-E100 Converter Unit,
• 1 External Power Supply, (for Multilink MC-E10 or Multilink MC-E100) d, i model only)
• 1 set Metal panel mounting clips and screws, 2 each
• 1 User Guide, i.e., this manual
Remove the Multilink MC-E10 or Multilink MC-E100 Converter from the shipping container.
Be sure to keep the shipping container should you need to ship the unit at a later date. In
the event there are items missing or damaged contact your supplier. If you need to return
the unit use the original shipping container. Refer to Section 6.0: Troubleshooting, for
specific return procedures.
3.2 Product Description
The multi-tasking, multi-environmental, multi-media (Copper and fiber) equipped with
multi-power (AC or DC) supply, 3-ports (two 10/100 RJ45+ one 10 or 100Mb fiber) Multilink
MC-E10 & Multilink MC-E100 Converters offer a flexible, cost-effective connectivity solution
for on-going demand of Ethernet Network. Available in two different flavors of fiber speed,
10Mb ST fiber as Multilink MC-E100 model and 100Mb (SC, MTRJ, LC) fiber as Multilink MC-
E10, the Multilink MC-E10 & Multilink MC-E100 Series are useful Ethernet devices for the
edge-of-network application. The plug and play, energy-efficient, and flavor-rich fiber
features make this sleek multi-purpose Converter convenient and cost-effective for the
user. The selection of various temperature ranges enable easy deployment in various
environments and qualify the Converter as a flexible solution, which provides multiple
solutions using very small space. Providing the combination of media converter with
Switch, the Multilink MC-E10 & Multilink MC-E100 Series is an ideal choice for edge-of–the-
network applications.
The Multilink MC-E10 & Multilink MC-E100 models units are for office and wiring closet
environments and use an external AC power supply. A metal case with convection cooling
is featured. Ambient operating temperature is 0° to 40°C. Storage temperature rating is -
40° to 85°C. The units can be mounted securely on a closet wall or metal cabinet by using
the metal panel mounting clips included.
The versatility options of the Multilink MC-E100 model allow users a wide choice in how to
connect to their 10 or 100Mb domain easily, without adding any additional media
converters.