Instruction manual

MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 1
Multilink MC-E10 & MC-E100
Converters
Digital Energy
Multilin
Multilink MC-E10 & MC-E100 Converter Switch
1. Specifications
PORTS PERFORMANCE
When a port is operating at 100Mbps:
Data Rate: .................................................................................................100Mbps
When a port is operating at 10 Mbps:
Data Rate: .................................................................................................10 Mbps
NETWORK STANDARDS
100Mb:.........................................................................................................Ethernet IEEE 802.3u, 100BASE-TX,
100BASE-FX
10 Mb:.......................................................................................................... Ethernet IEEE 802.3, 10BASE-T
Auto-sensing for speed:...................................................................... IEEE 802.3u
PACKET-PROCESSING BETWEEN DOMAINS
Filter and Forward Rate from 100Mbps ports: ........................148,800 pps max
Filtering and Forwarding Rate from 10 Mbps ports: ............14,880 pps max.
Processing type: .....................................................................................Store and Forward, non-blocking
Auto-learning: ........................................................................................2K address table
Address buffer age-out time: ..........................................................300 sec.
Packet buffers memory: .....................................................................128KB, dynamically shared on all
domains
Latency (not including packet time): ........................................... 100 to 10 Mbps: 5μs
10 to 100Mbps: 15μs
PATH DELAY VALUE
50 BT on all ports
MAXIMUM ETHERNET SEGMENT (OR DOMAIN) LENGTHS
10BASE-T (Unshielded twisted pair): .............................................100 m (328 ft)
10BASE-FL, Fiber optic:........................................................................2.0 km (6,562 ft)
10BASE-FL, Single-mode Fiber optic:............................................ 10.0 km (32,810ft)
100BASE-TX (CAT 5 UTP):.....................................................................100 m (328 ft)
100BASE-FX, half-duplex (multi-mode):.......................................412 m (1350 ft)
100BASE-FX, full-duplex (multi-mode): ........................................2.0 km (6,562 ft)