Instruction manual

MULTILINK MC-E10 & MC-E100 CONVERTER SWITCH
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 15
The metal DIN-Rail mounting hardware is optional and needs to be ordered as a separate
item (e.g. Model #DIN-RAIL-MC2). It comes with four screws to attach the bracket to the
MC unit. The rail clip is spring-loaded with a pull-up latch at the top for easy “snap-on”
attachment and removal.
4.5 Power Requirements for Multilink MC-E10 & Multilink MC-E100 Converters
FIGURE –1: Power Cable - North America
FIGURE –2: Power Cable - International
Multilink MC-E10 & Multilink MC-E100 Converters are power-efficient and can work with an
external AC power supply. These Converters require a nominal 12VDC input version.
The 12V DC power input has a plug of 2.5mm, center +ve , with 6 ft. cord. All the AC power
supply info detail is provided in Specifications Section 1.1.
The Multilink MC-E10 & Multilink MC-E100 Series are designed to provide reliable operation,
withstand higher temperature environments, and provide DC power choices for the user to
deploy in uncontrolled temperature environments.
The Internal 12V DC (8 – 15V DC) has a built-in terminal block for +, -, ground. The 9V DC
jack is also present. Detail information about the 12 VDC, the 24V DC and the –48V DC is
provided in the Specifications Section 1.