Instruction manual

14 MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
MULTILINK MC-E10 & MC-E100 CONVERTER SWITCH
The side-view picture shown here is an example of an installation of the model MC14-
TR+PS9, 19” rack-mount tray, holding a few Multilink MC-E10 & Multilink MC-E100 Series ,
10Mbps FT14’s and 100Mb 14E Media Converters, each with their power input plugged
into the built-in common AC power supply in the rear area of the tray. (PS units that come
with the MC’s are not used.)
Metal mounting screws in the bottom-front hold each of the media converters secure in
the tray, separately removable for service. The dual LEDs permit viewing operating status
of the Multilink MC-E10 & MC-E100 Converters from any angle.
4.4 DIN-Rail mounting option
The Multilink MC-E10 & Multilink MC-E100 Converters , designed for use in “Factory Floor”
Industrial Ethernet environments, are also available for DIN-Rail mounting in an enclosure
having DIN Rails.