Product manual

Expanding Communications
LHM-401
225 Industry Parkway - Nicholasville, KY 40356 - Ph. 800-535-4651
FUNCTION 2: Outbound Line Hunting — This configuration places emphasis on outbound
traffic. Up to 12 telecommunication devices are always in queue to hunt for one of 4 available lines, but only
4 ports will accept inbound calls.
Incoming traffic will NOT be routed. Incoming calls will will be directed to the PRIMARY LINE PORT ONLY.
Line 1 will ONLY connect Port 1(Primary Line Port)
Line 2 will ONLY connect Port 4 (Primary Line Port)
Line 3 will ONLY connect Port 7 (Primary Line Port)
Line 4 will ONLY connect Port 10 (Primary Line Port)
CALL ROUTING IN THIS CONFIGURATION:
If Selective Ring Service is not used, The Line Hunter has no ability to ‘locate’ (or route to) ports.
Line 1 will connect Primary Line Port 1ONLY.
Line 2 will connect Primary Line Port 4 ONLY.
Line 3 will connect Primary Line Port 7 ONLY.
Line 4 will connect Primary Line Port 10 ONLY.
No further routing is possible - Ports 2, 3, 5, 6, 8, 9, 11, 12 are invisible to incoming traffic.
LINE
HUNTER
1
LINE
2 3 4
1 2 3 4 5 6 7 8 9 10 11 12
LINE 1 LINE 2 LINE 3 LINE 4
POWER
MULT I - L INK
1 2 3
LINE 1
No Routing Capabilities
Without ‘Selective Ring’ Service, Inbound Calls go to
Primary Line Port ONLY
X X
Inbound Calls go Directly to Primary Line Ports ONLY
Outbound Calls - All 12 Ports Hunt for Available Line
1 4 7
10
6