Installation Instructions

TECHNICAL MANUAL TS 3x.10 KNX – ENGLISH

Number Name Object function C R

W T U Objekt size Data type

162

E5 switching level 2

output

1 Bit

switching

162 E5 switching 2 actuation output C - - T - 1 Bit switching

162 E5 ZZ: Counter reading 1-Byte-value output C - - T - 1 Byte 8-Bit unsigned value, counter pulses (0...255)

162 E5 ZZ: Counter reading 1-Byte-value output C - - T - 1 Byte counter pulses (0...255)

162 E5 ZZ: Counter reading 2-Byte-value output C - - T - 2 Bytes 2-Byte signed value, pulses difference

162 E5 ZZ: Counter reading 2-Byte-value output C - - T - 2 Bytes 2-Byte unsigned value, pulse

162 E5 ZZ: Counter reading 4-Byte-value output C - - T - 4 Bytes 4-Byte signed value, counter pulses

163 E5 Start event 0/1 input C - W - - 1 Bit switching

163 E5 End position top input C - W - - 1 Bit Boolean

163 E5 Scene storage display output C - - T - 1 Bit enable

163 E5 switching level 3 output C - - T - 1 Bit switching

163 E5 switching 3 actuation output C - - T - 1 Bit switching

163 E5 HZ: Counter reading request input C - W - - 1 Bit switching

164 E5 End position bottom input C - W - - 1 Bit Boolean

164 E5 switching level 4 output C - - T - 1 Bit switching

164 E5 switching 4 actuation output C - - T - 1 Bit switching

164 E5 HZ: Limit value exceeded output C - - T - 1 Bit Boolean

165 E5 Store scene input C - W - - 1 Bit enable

165 E5 Enable save input C - W - - 1 Bit enable

165 E5 switching level 5 output C - - T - 1 Bit switching

165

E5 Switching long actuation

output

1 Bit

switching

166 E5 Level up/down switching input C - W - - 1 Bit switching

166 E5 ZZ: Limit value exceeded output C - - T - 1 Bit Boolean

167

E5 Number actuations

input

1 Byte

counter pulses (0...255)

167 E5 ZZ: Counter reading request input C - W - - 1 Bit switching

168 E5 ZZ: Reverse direction input C - W - - 1 Bit Boolean

169 E5 ZZ: reset input C - W - - 1 Bit Boolean

170 E5 ZZ: Stop input C - W - - 1 Bit Boolean

179 E5 Disable input C - W - - 1 Bit enable