Instructions
www.hugo-mueller.de BA SC18.x4easy–1704x4easy MP; DE, GB, FR, IT – 23756 - 2016.09-V01
GB
Instruction Manual – Time switch Astro [SC 18.x4 easy / 170 4x4 easy]
Connection diagram
1. Safety instructions
2. Initial operation
1 channel
!
The installation and assembly of electrical equipment
must be only carried out only by a skilled Person!
Otherwise fire danger or danger of an electric shock
exists!
!
Connect the supply voltage/frequency as stated on the
product label!
!
Warranty void if housing opened by unauthorised person!
!
The electronic circuit is protected against a wide range of
external influences. Incorrect operating may occur if
external influences exceed certain limits
The time switch is delivered in sleep-mode, the display is switched off.
Press / -button to wake it up.
The current date and time is already programmed and European daylight savings time is activated.
Select the desired language by pressing - buttons and confirm it by pressing . (Remark: By pressing you move one
step backwards from the current position)
If required, date, time and daylight savings time mode can be adjusted also by pressing -buttons and a subsequent
confirmation with .
When using the astro function it is obligatory to enter the geographical position of the place of the installation of the device.
Choose with -buttons between „Zone“ (predefined zip codes) and „Coordinates“ (longitude and latitude). Confirm your
choice again with . (The easiest way is choosing a predefined zip code within the „Zone“-menu.)
Enter the nearest zip code or the geographical coordinates with -buttons and confirm with
Finally, you can activate the Astro-program for the whole week (no offset) by confirming “Astro preprogrammed”! If you
choose “Astro not preprogrammed” you can individually program the Astro-function later in the programming menu. To
complete the initial operations confirm your choice with the button.
2 channels
3. Technical data
4. Service
5. Intended use
6. Battery
7. Permanent
Supply voltage
230 V, 50-60 Hz
Power consumption
0,2-1,0W (depending on the switching status)
Contact material
AgSnO2
Type of protection
IP 20 to DIN EN 60529
Permitted ambiet temperature
-30°…+55°
Mode of oeration
1 BSTU
Degree of contamination
2
Rated surge voltage
4 kV
Standard
DIN EN 60730-1/DIN EN 60730-2-7
CFL, LED
Ideal for modern lamps
Hugo Müller GmbH & Co KG
Sturmbühlstraße 145-149
D-78054 VS-Schwenningen
+49 7720 80836
www.hugo-mueller.de
DIN-rail mounting product:
The device fits for the particular use of the following tasks:
Illumination of private and industrial areas, street and shop-
window lightening, regulation of air conditioning, flushing,
motors, pumps, plants and machinery as well as to
simulate presence etc.
Operate the device in a dry room only! The installation must
be in accordance with the instruction manual. The device is
not qualified for security relevant tasks such as emergency
doors, fire protection equipment
Permanent ON / OFF
8. Key function
9. Handling advice
10. Additional adjustments
1. To access the Enter-mode from the automatic-mode.
2. To revert to the beginning of the current (sub-) menu.
The time switch is programmable without external
power supply after pressing the / -button.
To revert one step or one level back while in the
Enter-Mode press
After completion of a (sub-) menu confirming end
will return the device into the automatic-mode.
With - the choice changes from end to
continue. By confirming continue the time
switch returns to the beginning of the current (sub-)
menu.
When confirming end before completion, the time
switch returns to the automatic-mode without
saving the entered data.
Menu
Main menu
Application
Program query
Program
To query the programming steps and remaining memory locations
1. To adjust the flashing digit.
2. To scroll through a choice
Program delete
Program
Deletion of switching time(s). The program for all channels, single channels and single
programming steps within on channel can be deleted.
Date-Time
Adjustment
Adjustment of date and time
1. Automatic-mode: To switch the channel ON or OFF until
the next programming step occurs.
2. Automatic-mode: A push longer than 3 sec. = Permanent
switching status.
Summertime
Adjustment
Adjustment of the daylight saving time mode (ON/OFF)
Language
Adjustment
Choice of languages
/
1. To activate the time switch when operated without power
supply.
2. To confirm the selection or the entered data.
Factory Defaults
Adjustment
Reset to the state of delivery.
Counter
Options
Displays the hour counter and pulse counter for each channel and the time switch
itself.
PIN-Code
Options
The time switch can be locked with a 4-digit PIN-Code. The code can be adjusted,
activated and deactivated. If you have forgotten the Code please call customer service.
11. Menu overview
12. Symbol legend
OK
OKOK
**At 2 channel-
version
OKOK OKOK OKOK OKOK
Channel is switched ON
Channel is switched OFF
erm
For the current date the “holiday program” / “permanent by date” is activated
Standard programming step
Current state is based on a manual over-ride. The state will be cancelled with the next programming
step.
erm
Current state is based on a manual override. The state is permanent until terminated manual.
Days of the week Monday, Tuesday, ... Sunday;
The underscores indicate if the program is active for the days above.
Astro function: Current state is based on a sunrise or sunset taking into account an optionally adjusted Offset.
The time switch is locked; to unlock the device the PIN has to be entered.
13. New program
14. Astro adjustment
OK
OKOK
ASTROPROGRAM
See
Point 7
PERMANENT
ASTROPROGRAM:
The astro function allows you to switch the whole year
trough in relation to sunset and sunrise, e.g. for
illumination purposes (astro-ON with sunset and astro-
OFF with sunrise)
BLOCK PROGRAMMING:
Activation or deactivation of the weekday (1...7) on
which the switching time should happen. Withe the +/-
keys you can change from avtivate yes“ to deactivate “
“no“. Confirm ech day with OK.
OFFSET:
While programming an astro program step there will be
no daytime (hh:ss) suggested. Instead of this you have
the possibility to enter an offset. E.G. if you like to
switch on the light 20 minutes before sunset you have
to enter an offset of minus 20 minutes while
programming astro ON.
OK
OKOK
OK
OKOK
OK
OKOK
EXTRAPROGRAM
YES
YES
Wednesday NO
Thursday yes
Friday Yes
Saturday NO
no
+00
Offset
YES
NO
22:00
23:00
YES
NO
5:00
5:30
YES
no
+00
Offset
YES
NO
0:00
15:30
YES
NO
0:00
17:35
SunriseSunset
Astro off
One permanent by date
programming step
(holiday function) for each
channel is possible.
During the desired period
(The function is valid for
the whole days) the channel
can be switched off (perm off)
or on (perm on).
You can program further "extra" switching times
e.g. if you like to use a channel of the time
switch for a non-"Astro lighting-application".
You have to activate the "extra switching times"
within the menu Options.
The "extra switching times" works like a standard
weekly program (ON / OFF). After activating
the "extra switching time" it will be offered within
the programming menu "new program".
Zone = country
ZIP = zip code
OK
OK
OK
OK
GMT
OK
OK
OK
N
S
W E
GMT
OK
OKOK
15. Programming via NFC
max. 1 cm
A
P
P
A
P
P
N
F
C
a
c
t
i
v
e
D
o
w
n
l
o
a
d
1
2
Programmable via NFC with the android APP: Save’n carry