Instructions

ManualsBrandsMüller ManualsBuilding Technology & Smart LivingMüller PP 50 pro Timer software package

Manual

PC-Software Save`n carry PP 50 pro

Summary of content (19 pages)

PAGE 2
Directory 1 Directory 1 Directory ............................................................................. 2 2 2.1 2.2 2.3 2.4 Introduction ........................................................................ 3 Product description .............................................................. 3 Pictograms ........................................................................... 3 Software installation ............................................................. 4 Hardware installation.....
PAGE 3
Introduction 2 Introduction 2.1 Product description The PC-Software „Save`n carry PP 50 pro“ is a tool for a quick and easy creation of a switching program. Via USB-adapter and data key „DK pro“ the switching program can be transferred between the PC and the PC. 2.2 Pictograms Pictograms Definition Information The pictogram offers helpful information. Title of a handling sequence The pictogram shows the handling sequence.
PAGE 4
Introduction 2.3 Software installation Please carry out following instructions for installing the programming software Save`n carry PP 50 pro successfully under Windows (2000, XP, VISTA): Â ) ) Software installation Insert CD Save`n carry PP 50 pro into CD/DVD-drive. Installation starts automatically, please carry-out advises of the routine.
PAGE 5
Introduction 2.4 Hardware installation Please carry-out following instructions for installing the USB adapter PP 50 pro successfully under Windows (2000, XP, VISTA): Â Step 1 – Connect USB-cable ) Connect B-USB-connector of the cable (included in delivery) to adapter PP 50 pro. ) Connect A-USB-connector of the cable with your computer Â Step 2 – Driver installation After Step 1 the hardware installing tool of windows starts automatically: ) ) Choose: „No, ...
PAGE 6
Introduction Windows copies driver ) Confirm security note with „Continue Anyway“. ) Complete the first part of the installation by clicking „Finish“. Further installation Steps required, the procedure will start automatically. ) Confirm again security note with „Continue Anyway“. ) ) Choose: „No, ...
PAGE 7
Introduction ) ) Choose: „Install from a list or specific location“ ) ) ) ) Confirm: „Search for the best driver in these location“ ) confirm with „Next >“ Confirm with „Next >“ Confirm: „Include this location in the search“ ´Click „Browse“ Enter the path to sub-folder „treiber“ on CD „Save´n carry PP 50 pro“ Windows copies driver ) Complete the the installation by clicking „Finish“.
PAGE 8
Program start and languages 3 Program start and languages 3.1 Start icon ) Start the PC-software Save`n carry PP 50 pro by a double click of the PP 50 pro start-symbol OR ) 3.2 Execute Save`n carry PP 50 pro within “windows” start menu Start -> Programs -> Save`n carry -> PP 50 pro. Define type of time switch The program starts with a welcome window. ) ) 3.3 Choose the desired product type.
PAGE 9
Overview, menu and symbols 4 Overview, menu and symbols 4.1 Program overview You have the choice between two different views of your switching program: Table and chart. 4.1.1 Table Default view is „table“ and the switching Steps are listed as lines. 4.1.2 Chart You always have the possibility to switch between table and chart. If you switch to chart, three different charts with time dependent switching status of all channels will appear.
PAGE 10
Overview, menu and symbols 4.1.4 Refresh chart If you are working with the chart, new switching times will only be shown if you refresh the chart by click „Refresh chart” symbol. Â ) Refresh chart Click „Refresh chart“ symbol New switching Steps will only be shown after refreshing the chart. The more memory locations you use, the longer it takes to refresh/show the chart. This can take up to 1 minute! 4.1.5 Choose the period you are interested in! 1. Yearly / 2. Weekly / 3. Daily / 4.
PAGE 11
Overview, menu and symbols 4.2 Menu bar - overview File Edit Data-key Adjustments View Help New project New switching time Reading data-key Language Status bar Manual Open Duplicate Programming data-key Project description Toolbar About… Open last project Delete Channel description Show chart Close project Astro settings Show table Save project Cycle settings Save project as… Location project files Export file as CSV 4.
PAGE 12
Programming of a new switching time 5 Programming of a new switching time 5.
PAGE 13
Programming of a new switching time 5.2 SP special program (yearly time switch) The yearly function is fulfilled by the use of so called special (weekly) programs (SP) which are later activated (called up) by date as often as required. You can define up to 10 different special programs with arbitrary switching Steps (of course only within the total number of 300 memory locations). The SP will only be applied if activated by date (SP Activation by date see point 5.2.1).
PAGE 14
Programming of a new switching time Â Further steps Further programming steps depend on the choice of the switching function (Step 4). Follow further advices within window „new switching time“ A SP will only be applied after Activation (call up by date) -> see point 5.2.1. 5.2.1 Activation of a special program (yearly time switch) Special programs will only be applied if activated (called up) by date. SP can be called up as often as required (limited only by the max. quantity of memory locations).
PAGE 15
Programming of a new switching time Â ) ) Â 5.3 Step 5 Enter „start date“ and „end date“ of your special program Confirm with „OK >>“ Step 6 ) A „Special function“ can be activated optionally (standard is NO special function). ) Confirm with „OK >>“ Add-Ons The following functions are NOT included in all types of time switches!!! 5.3.1 Extra switching time Extra switching time is one single additional switching time that can be programmed by date.
PAGE 16
Data key functions 6 Data key functions For a successful data transfer the time switch and the type of time switch of the PC project must be identical!!! 6.1 Read data-key Â ) Step 1 Click symbol „read data-key“ Window „Save`n carry pro“ opens if project is empty!! Â ) Step 2 Click „read data-key“ Data is now read from the data key!! Â ) Step 3 Confirm with „OK“ All switching times will be shown on the screen of the PC!! 6.
PAGE 17
Further information 7 Further information 7.1 Refreshing the chart While working with the chart view and if you enter a new switching time you have to refresh the chart before you see the switching time in the diagram. Â ) Refresh chart click „Refresh chart“ symbol New switching Steps will only be shown after refreshing the chart. The more memory locations you use, the longer it takes to refresh/show the chart. This can take up to 1 minute! 7.
PAGE 18
Further information 7.3 Cycle function The cycle is not offered as switching function until you have defined a cycle. You have to define the cycle you would like to use first as follows: 7.3.1 Cycle activation and definition Â ) Step 1 click symbol „cycle-settings“ Window „cycle settings“ opens!! Â Step 2 Up to 4 different cycles can be activated and defined within this window. ) Â Activate the desired cycle number (click) Step 3 The max.
PAGE 19
Address and Updates 8 Address and Updates 8.1 Address Hugo Müller Hugo Müller GmbH & Co KG Sturmbühlstraße 145-149 D-78054 VS-Schwenningen Tel.: +49 7720 80 836 Fax: +49 7720 31 083 E-Mail: info@hugo-mueller.de Internet: www.hugo-mueller.de 8.2 Updates The most current version of „Save`n carry PP 50 pro“ is available on the website of Hugo Müller: www.hugo-mueller.