Installation Instructions

TECHNICAL MANUAL GS 4x.10 KNX – ENGLISH
9
Number Name Object function C R W T U Objekt size Data type
82
E1 4-Byte value (0...4.294.967.295) (Event 1)
output
C
-
-
T
-
4 Bytes
4-Byte unsigned value, counter pulses
82 E1 2-Byte Floating point (Event 1) output C - - T - 2 Bytes float value, Temperature (°C)
82 E1 switching level 2 output C - - T - 1 Bit switching
82 E1 switching 2 actuation output C - - T - 1 Bit switching
82 E1 ZZ: Counter reading 1-Byte-value output C - - T - 1 Byte 8-Bit unsigned value, counter pulses (0...255)
82 E1 ZZ: Counter reading 1-Byte-value output C - - T - 1 Byte counter pulses (0...255)
82 E1 ZZ: Counter reading 2-Byte-value output C - - T - 2 Bytes 2-Byte signed value, pulses difference
82 E1 ZZ: Counter reading 2-Byte-value output C - - T - 2 Bytes 2-Byte unsigned value, pulse
82 E1 ZZ: Counter reading 4-Byte-value output C - - T - 4 Bytes 4-Byte signed value, counter pulses
82 E1 request input C - W - - 1 Bit switching
83 E1 start event 0/1 input C - W - - 1 Bit switching
83 E1 End position top input C - W - - 1 Bit Boolean
83 E1 Display storing scene output C - - T - 1 Bit enable
83 E1 switching level 3 output C - - T - 1 Bit switching
83 E1 switching 3 actuation output C - - T - 1 Bit switching
83 E1 HZ: Counter reading request input C - W - - 1 Bit switching
83 E1 out of range output C - - T - 1 Bit switching
84 E1 End position bottom input C - W - - 1 Bit Boolean
84 E1 switching level 4 output C - - T - 1 Bit switching
84 E1 switching 4 actuation output C - - T - 1 Bit switching
84
E1 HZ: Maximum level exceeded
output
C
-
-
T
-
1 Bit
Boolean
84 E1 threshold output C - - T - 1 Bit switching
84 E1 threshold output C - - T - 1 Byte counter pulses (0...255)
84
E1 threshold
output
C
-
-
T
-
2 Bytes
2-Byte unsigned value, pulse
84 E1 threshold output C - - T - 2 Bytes float value, Temperature (°C)
85 E1 Store scene input C - W - - 1 Bit enable
85 E1 Enable save input C - W - - 1 Bit enable
85 E1 switching level 5 output C - - T - 1 Bit switching
85 E1 switching long actuation output C - - T - 1 Bit switching
86 E1 switching level up/down input C - W - - 1 Bit switching
86 E1 ZZ: Maximum level exceeded output C - - T - 1 Bit Boolean
86 E1 Change threshold lower minimum input C - W - - 1 Byte percent (0...100%)
87 E1 Number of actuations input C - W - - 1 Byte counter pulses (0...255)
87 E1 ZZ: Request counter reading input C - W - - 1 Bit switching
87 E1 Change threshold upper maximum input C - W - - 1 Byte percent (0...100%)