Installation Instructions

TECHNICAL MANUAL GS 4x.10 KNX – ENGLISH
59
13.2.3.5 E4/5 Output threshold value 1 / 2 (only if E4 general  temperature function = Temperature)
Designation
Options
Description
Send threshold
value object
In case of change
In case of change
and cyclic
Send if threshold value
undershot, every
Send if threshold value
exceeded, every
5 seconds
…
24 hours
5 seconds
…
24 hours
Send threshold only in case of change.
Send threshold in case of change as well as cyclically (adjustable cycle time).
13.2.3.6 E4/5 Threshold values (only if E4 general  temperature function = Floor heating thermal limiter)
Designation
Options
Description
Value [°C]
10…60
Adjustment of temperature value for the termal limiter.
Hysteresis [°C]
0,5…5,0
Configuration of hysteresis of temperature value for thermal limiter.