Installation Instructions

TECHNICAL MANUAL GS 4x.10 KNX – ENGLISH
18
Number Name Object function C R W T U Objekt size Data type
164
E5 HZ: Limit value exceeded
output
C
-
-
T
-
1 Bit
Boolean
165 E5 Store scene input C - W - - 1 Bit enable
165 E5 Enable save input C - W - - 1 Bit enable
165 E5 switching level 5 output C - - T - 1 Bit switching
165 E5 Switching long actuation output C - - T - 1 Bit switching
166 E5 Level up/down switching input C - W - - 1 Bit switching
166 E5 ZZ: Limit value exceeded output C - - T - 1 Bit Boolean
167 E5 Number actuations input C - W - - 1 Byte counter pulses (0...255)
167 E5 ZZ: Counter reading request input C - W - - 1 Bit switching
168 E5 ZZ: Reverse direction input C - W - - 1 Bit Boolean
169 E5 ZZ: reset input C - W - - 1 Bit Boolean
170 E5 ZZ: Stop input C - W - - 1 Bit Boolean
179 E5 Disable input C - W - - 1 Bit enable
Communication flags
Flag
Name
Meaning
C
Communication
Object can communicate
R
Read
Object status can be requested (ETS, display etc.)
W
Write
Object can receive information
T
Transmit
Object can send information
U
Update
Object can request a value from another bus participant. The answer is interpreted as write command and updates the value of the communication object. This is typically
used to request external sensor data after a bus voltage recovery.