Installation Instructions

TECHNICAL MANUAL GS 4x.10 KNX – ENGLISH
39
13.2 E1 – E5 General
Designation
Options
Description
Designation
Possibility to name each input individually.
Function
Inactive
Input disabled.
Binary input
(available for E1-E5)
Switching / Alarm
Dimming
Blind
Value
Scene
Switching sequences
Multiple operation
Pulse counter
Available for inputs E1 to E5 (in total up to 5x).
Definition of the desired use each specific input.
Depending on the selected function, different parameters are available.
Details about the configuration of binary inputs see chapter 13.2.1.
Analogue input
(E1 only)
Function available for input E1 only (in total only 1x).
Details about the configuration of the analogue input see chapter 13.2.2.
External temperature
sensor (E4 only)
Function available for input E4 only (in total only 1x).
Important: By activating the external temperature sensor input on input E4, the inputs E4 and E5 will
be combined. E5 will not be available as binary input while E4 is set as temperature input.
Details about the configuration of the external temperature sensor input see chapter 13.2.3.