Data Sheet

Rights to technical amendments reserved.
switching controlling counting
Room temperature controls TS 3x.10 knx
for wall mounting
Technical data
Power supply via KNX bus voltage
Bus current <10mA
Bus system KNX
Sensors temperature
Manual operation manual adjustment of set-point temperature
(TS 31.10 knx only) (adjustment range ± 3 °; increment 0,5 °)
Measuring range temperature 0°…+50°C
Permitted ambient temperature 0°…+50°C
Housing self-extinguishing thermoplastic
Housing color studio white (similar to RAL 9016)
Mounting wall mounting, preferrably combined
with hollow-wall box
Type of connection (KNX) PCB Push-in terminal block
Type of protection IP 20 (DIN EN 60529)
Class of protection III when installed according to regulations
Type of connection external inputs Wire diameter max. 6 x 0,5 mm
2
, strip length 7 mm
Order number Version Man. temp. adju
stment Sensors
TS 30.10 knx forwal
l mounting — Temperature
TS 31.10 knx forwall mounting ± 3° manually via Keypad Temperature
Housing colour
The ETS-Software (> 4.2) of the room temperature controls TS 3x.10 knx offers:
Temperature J Value output
J Control heating / cooling (2-point and PI control)
J Alarms
and much more…
Pin assignment option 1*:
Pin Function
1 Binary input
2 Binary input
3 Binary input
4 Binary input
5 Binary input
6 GND
Pin assignment option 2*:
Pin Function
1 0–10 V / 1–10 V
2 Binary input
3 Binary input
4 Ext. temperature
5 sensor (PT1000)
6 GND
* Selection of input functions /
options via ETS - parameter configuration
80,50
80,50
17
External inputs (binary / analogue):
Terminal Terminal
Option 1 Option 2