Datasheet

62
Rights to technical amendments reserved.
Radio Receiver DCF-Time FU 20.00 pro
for wall mounting
Technica l data
Power Supply Via time switch or master clock (without battery)
Output DCF-protocol
Receiver narrowband-heterodyne receiver
Operation indicator flashing LED on receiving
Consequence of an interference with reception time switches use their quartz as time base
Antenna built-in ferrite rod
Permitted ambient temperature –20°…+50°C
Housing self-extinguishing thermoplastic
Mounting Fastening angle for wall mounting
(receiver is rotatable)
Type of protection IP 54 (DIN EN 60529)
Recommended cable Shielded / Section 0.33 up to 2.5 m
2
Type of connection Power supply and DCF protocol via 2-wire-connection.
Accessory for hugomüller time switches and master
clocks.
[Special model: FU 21.00 pro with 3-wire-connection
for alternative applications / external power-supply
required / technical details and further information
on request]
쐍 One receiver can connect to 10 time
switches
쐍 DCF 77 radio link with FU 20.00 pro
쐍 Time and date are automatically
transfered to the clock
쐍 Fully automatic summertime
(European standard)
쐍 Operation indicator:
flashing LED on receiving
쐍 Compact housing
쐍 Simple mounting with fastening angle,
receiver is rotatable
쐍 Connection wire specifications: 2-wire,
no shield, variable core cross-section
쐍 Max. length of wire between receiver
and time switch 200 m
Range of the signal approx. 1500 km
Order number Version
FU 20.00 pro for wall mounting (receiver is rotatable)
Housing colour