Data Sheet

FEEL WELL
Page 1 / 2
AIR QUALITY SENSORS / CO2 MONITOR
CO -monitor GS 42.00 pro
2
Accessories
Back part for
surface wiring
200.004
Overview
CO -sensor / CO -monitor
Measurement of an aerosol equivalent
LED signal
3 open-collector outputs
Acoustic signaling deactivatable
Mute function
Detection of air quality
Easy installation and mounting
Modern and planar design
Wall mounting
Note:
The 230 V AC to 12 V DC power supply doesn't fit in the
back part 200.004, the back part is only for surface
wiring. Hence, it is recommended to install the power
supply in a wall or junction box.
Information about CO2 and Covid-19
Every person is emitting CO and aerosols e.g. during
breathing. Today aerosols are claimed to be one of
the transmission ways of SARS-CoV-2. CO -
concentrations can be measured and the correlation
between the CO and the aerosol concentration can be
used for analytical investigations, which use the
measured CO -concentration to calculate a likely
aerosol concentration. (TU Berlin)
A longer stay in small, bad or not ventilated room can
increase the probability of a Covid-19 spread by
aerosols even on bigger distances over 2 m. (RKI)
The use of our CO -sensors and the resulting room
ventilation helps minimizing the risk of infection e.g.
in schools or offices, gyms, restaurants or other
premises where several people stay together.
Order numbers
2 2
2
2
2
2
2
GS 42.00 pro CO -Air quality sensor /
CO -monitor
2
2
Available from
Q4 2020
Hugo Müller Gmbh & Co KG | Karlstraße 90 | D-78054 VS-Schwenningen
Tel: [phone] | Fax: [phone] | E-Mail: [e-mail] | Internet: www.hugo-mueller.de