Instructions

tint ceiling spots NALO
62
INSTRUCTION MANUAL
Operation
The tint ceiling spots is already connected to the supplied remote control and
can be controlled directly. Further tint lamps and lights must first be integrated in
the remote control (see chapter „Operation - Adding a new tint product“).
The tint remote control is a radio remote control.
• You do not need to “aim” at the tint products with the tint remote control to
operate them.
• The tint remote control will also penetrate solid materials such as walls, doors
and windows.
• The maximum range (depending on the obstacles between the tint remote
control and the tint products) is approx. 30 metres in the open air.
• Each button press will be confirmed by the feedback display lighting up.
Basic functions
Switching on/off
Press the standby button to switch the tint product on
and off again. The memory function will store the last
“illumination state” and will start again automatically the
next time the tint product is switched on.
Set white tone
Short-press to select permanently stored white tone settings:
warm white, neutral white and cold white.
Long-press to set the desired white tone from a continuous scale
that reaches the super-warm white range.