User Guide

6
ASSEMBLY
Tools Required:
3/16 allen wrench (included in pouch)
5/32 allen wrench (included in pouch)
1/4 allen wrench (included in pouch)
Tape measure
Adjustment Levers:
Refer to figure 2.
The adjustment levers can be
ratcheted so the handle can rotate
without affecting the tightness of the
screw.
1. Pull out on black knob. Rotate the
handle so it is not obstructed.
2. Release the black knob, and let
the handle slide back and lock
with the screw.
3. Continue tightening/loosening the screw by rotating the
handle.
Ball Lock Pins:
Refer to figure 3.
1. Hold the head of the pin
between your index and
middle fingers.
2. Press in on the button (1) with
your thumb while extracting
or inserting the pin.
Figure 2
Figure 3
1