User Guide
10
FITTING INSTRUCTIONS
Measure the Child:
1.
Trunk width: ___
2. Hip width: ___
3. Inseam to 1 below his/her
axilla: ___
Sit Bar, Pelvic & Trunk
Supports:
Refer to figure 8.
1.
Loosen the two
allen screws (1)
on the back of the trunk bars.
Adjust the width of the trunk
bars to accommodate the child s
chest (use measurement #1 above).
Make sure the bars are symmetrical
on both sides.
2.
Trunk support height and angle can be
adjusted via the allen screws on the
back of the trunk bar bracket (2).
3.
Trunk bar depth can be adjusted by
the allen screw on each arm (3).
4.
Loosen the four (two on each side) al-
len screws (4) on the back of the pel-
vic support and adjust to accommo-
date the child s hip width
(use
measurement #2
above).
5. Sit bar height: Loosen the adjustment lever
(
5
) and slide
the the sit bar along the front column. Initially place the
sit bar as high as possible on the column.
6.
Pelvic support height: Loosen the two allen screws
(
6
)
on the top and bottom
of the pelvic
pad
. Place the pelvic
1
4
5
Figure 8
6
2
3
7