User Guide

FITTING INSTRUCTIONS

Measure the Child:

Trunk Width:

Hip Width:_____

3. Inseam to 1 below his/her axilla: _____

Seat, Pelvic & Trunk Supports:

Refer to figure 6.

1. Open the front of the pelvic &

trunk support straps, by

releasing the buckles and

unfastening the velcro.

2. Loosen the eight allen screws

(1) on the back of the four

sling bar clamps.

Adjust the width of the trunk

bars to accommodate the

child s chest (use measurement

#1 above). Make sure the bars

are symmetrical on both sides.

Tighten the four allen screws

on the trunk s sling bar clamps.

4. Repeat steps 2 & 3 for the hip

support using measurement #2

above.

Seat height: Loosen the 4 allen

screws (2) and slide the seat

along the front column.

Initially place the seat as high as possible on the column.

Retighten the screws.

Hip support height: (Refer to figure 7.) Loosen the two

Figure 6