User Guide

13
Spring/Shock Tension:
The seat and pelvic/trunk supports assist in lifting the child
into standing. The amount of lift is controlled by the
degree of spring tension.
Spring assistance
adjustment:
Refer to figure 11.
1. Depress the slide lock
bar (1) and hold it in
to release the spring
stop (2).
2. Slide the spring stop
up/down to adjust the
spring
assistance.Release the slide lock bar to lock the spring
stop in the desired position.
Shock adjustment:
1. For the variable shock pressure adjustment use the
supplied hand pump (3), pump the shock up to the
required pressure to give the particular user adequate
support.
2. Damping control: (Refer to figure
12) Turn red knob clockwise to
increase damping (slow rate of
return) and counter - clockwise to
decrease.
Figure 7A
B2
1
2
3
Figure 11
Figure 12