User Guide

12
Column Height:
Refer to figure 10.
After setting the pitch
and the seat - to - trunk
support distance, set
the column height.
1. Measure the
inseam:
Determine the
child s inseam
height: ____
a) If the child
requires support
at the upper trunk
to stand, measure
from the floor to
2 inches above
the inseam.
b) If the child requires only hip support to stand, measure
from the floor to the inseam.
2. Adjust the Column Height:
a) Loosen the levers (1) and then remove the ball lock pin
on the rear column adjustment tube.
b) Slide the rear column (2) up/down so that the seat
height is the same as the inseam height determined
above.
c) Replace the ball lock pin and tighten the levers to
secure the rear column in place.
d) For more precise adjustments, rotate the crank (3)
clockwise to raise the column assembly or
counterclockwise to lower the column assembly.
Figure 10
1
2
3