User Guide

19
Unicycle Saddle Seat:
Refer to figures 22 & 23
Mounting:
Refer to the Double Sit Bar
instructions.
Adjustments:
1. Height: Remove the ball
lock pin (22.1) and slide
the saddle seat along the
front column to the desired
height. Replace the ball
lock pin.
2. Depth: Loosen the knob
(22.2). Slide the saddle seat
along the seat bar to the
desired depth. Tighten
knob.
3. Seat Angle: Loosen the
four 1/4 - 20 nuts (23.1),
underneath the saddle seat.
Tilt the seat to the desired
angle and tighten the nuts
to secure.
Figure 22
1
2
Figure 23
1